Hubei Jopower Battery Co.,Ltd
|
Place of Origin: | Zhejiang, China (Mainland) |
Add to My Favorites | |
HiSupplier Escrow |
High Stablity Lithium Motorcycle Battery Super Low Temperature Cranking with BMS
Special Specifications:
Cell voltage:
Min. discharge voltage = 2.5V
Working voltage = 3.0 ~ 3.3 V
Max. charge voltage = 3.65V
Volumetric energy density = 220 Wh/dm3 (790 kJ/dm3)
Gravimetric energy density > 90 Wh/kg[12] (> 320 J/g)
100% DOD cycle life (number of cycles to 80% of original capacity) = 2,000–7,000
10% DOD cycle life (number of cycles to 80% of original capacity) > 10,000
The lithium iron phosphate (LiFePO4) battery, also called LFP battery (with "LFP" standing for "lithium ferrophosphate"), is a type of rechargeable battery, specifically a lithium-ion battery, which uses LiFePO4 as a cathode material. LiFePO4 batteries have somewhat lower energy density than the more common LiCoO2 design found in consumer electronics, but offers longer lifetimes, better power density (the rate that energy can be drawn from them) and are inherently safer. LiFePO4 is finding a number of roles in vehicle use and backup power.
Lithium Iron Phosphate (LiFePO4, LFE) is kind of Li-Ion rechargeable battery for high power applications, such as EV car , Power Tool and RC hobby. LFP cells feature with high discharging current, non explosive, long cycle life (>2000@0.2C rate, IEC Standard), but its energy density is lower than normal Li-Ion cell (Li-Co) (higher NiMH cell). Please click Knowledge on LiFePO4 battery to learn more detail. LFP cell has 3.2V nominal working voltage and shall be cut-off power at 3.6-3.8V per cell during charging. Please see the table below to see comparison between LFP and other rechargeable batteries. LFP battery has the lowest cost if considering its long cycle life
Chemistry | Voltage | Energy Density | Working Temp. | Cycle Life | Safety | Environmental | Cost based on cycle life x wh of SLA |
LiFePO4 | 3.2V | >120 wh/kg | -20-60 °C | >2000(0.2C rate, IEC Standard) |
Safe | Good |
0.15-0.25 |
Lead acid | 2.0V | > 35wh/kg | -20 - 40°C | >200 | Safe | Not good | 1 |
NiCd | 1.2V | > 40wh/kg | -20 - 50 °C | >1000 | Safe | Bad | 0.7 |
NiMH | 1.2V | >80 wh/kg | -20 - 50 °C | >500 | Safe | Good | 1.2-1.4 |
LiMnxNiyCozO2 | 3.7V | >160 wh/kg | -20 - 40 °C | >500 | better than LiCo | OK | 1.5-2.0 |
LiCoO2 | 3.7V | >200 wh/kg | -20 - 60 °C | > 500 | Unsafe w/o PCM | OK | 1.5-2.0 |
Characteristics of LiFePo4 motorcycle batteries:
High security LiFePo4 battery is the most safe type of all Lithium Ion Batteries,will not burn and explode under any extrime situation.
High stablity.It has long time and stable performance,low self-discharge.No loss after long time leave unused.
Utra long life. It has over 2000 times cycle life. Designed life can be 6 to 10 years.
Utra strong starting ability. The instant starting current can reach 80C.
Long time maintanence free. No capacity loss after long time leave unused. Even after 2 years without maintanence it can start vehicles.
Good low temperature starting ability,even at -20 termperature it can easily start vehicles.
Compatible with electric circuit of lead acid batteries. It can replace any type of lead acid batteries and can be recharged by any lead acid battery chargers.
Environment-friendly. No containing any lead material,sulfric acid.
Major parameters of protection board:
Overcharge protection: Starting protection in the voltage range of 15.0v -15.6v,resume normal under the voltage 15.0v.
Over discharge protection: Starting protection in the voltage range of 8.0v-8.4v,resume normal over 8.4v.
Short circuit protection: Starting protection when short circuit,switch off the load,resume normal.
Average voltage: average 3.6v voltage per cell.
Installation instructions:
Please check the recharge voltage of the vehicles. It can be installed in the voltage range of 13.5v to 14.8v.
It shows there is malfuction when the charge voltage is over 15.0v. Please install the batteries after overhauling.
Please check the battery voltage before installation. No need to charge when battery voltage is over 12.8v. Please charge the battery to over 13.6v-14.8v when the voltage is under 12.8v.
Please check the position of the positive and negative to avoid short circuit.
Charge and maintanence instructions:
Please make a charge maintanence to keep the best performance when the LiFePo4 motorcycle batteries are leave unused for over 1 year.
Suggest to use 14.8v lithium battery charger as the preference,and the 13.8v lead acid battery chargers is the second choice.
Special Notice:
LiFePo4 motorcycle battery is only used for starting the motorcycles or as the power of motorcycle related applications. There may be any danger or loss if for other applications,please be cautious.
Battery model | LFP9-BS | |
Voltage | 12v | |
Capacity | 3.6 (9)Ah | |
Size | 150*87*105 mm | |
CCA | @ 25 | @ -18 |
320 | 190 | |
Replaced Model | YTX9-BS (lead acid) |