Stable Cold Cranking Ability Lithium Motorcycle Battery to Replace Lead Acid YTX12-BS

Lighter, Stronger, Better! Powerstart LFP batteries deliver more energy faster, with less weight than any other brand or technology available on the market today. Powerstart has much lighter weight than the orignal-equipment battery, and do not suffer the chemical sulfation that kills lead acid batteries as they sit untended. The batteries are easy to install, and have the same charge requirements as lead-acid types. Typical motorcycle charging systems range from 13.7V to 14.8V output voltage. LFP 12v series require a minimum charging voltage 13.1V or higher at idle, and must not exceed 15.2V charge maximum.

Characteristics of LiFePo4 motorcycle batteries:
 High security LiFePo4 battery is the most safe type of all Lithium Ion Batteries,will not burn and explode under any extrime situation.
High stablity.It has long time and stable performance,low self-discharge.No loss after long time leave unused.
 Utra long life. It has over 2000 times cycle life. Designed life can be 6 to 10 years.
 Utra strong starting ability. The instant starting current can reach 80C.
 Long time maintanence free. No capacity loss after long time leave unused. Even after 2 years without maintanence it can start vehicles. 
 Good low temperature starting ability,even at -20 termperature it can easily start vehicles.
 Compatible with electric circuit of lead acid batteries. It can replace any type of lead acid batteries and can be recharged by any lead acid battery chargers.
 Environment-friendly. No containing any lead material,sulfric acid.

Major parameters of protection board:
 Overcharge protection: Starting protection in the voltage range of 15.0v -15.6v,resume normal under the voltage 15.0v.
 Over discharge protection: Starting protection in the voltage range of 8.0v-8.4v,resume normal over 8.4v.
 Short circuit protection: Starting protection when short circuit,switch off the load,resume normal.
 Average voltage: average 3.6v voltage per cell.

Installation instructions:
 Please check the recharge voltage of the vehicles. It can be installed in the voltage range of 13.5v to 14.8v.
 It shows there is malfuction when the charge voltage is over 15.0v. Please install the batteries after overhauling.
 Please check the battery voltage before installation. No need to charge when battery voltage is over 12.8v. Please charge the battery to over 13.6v-14.8v when the voltage is under 12.8v.
 Please check the position of the positive and negative to avoid short circuit.

Charge and maintanence instructions:
 Please make a charge maintanence to keep the best performance when the LiFePo4 motorcycle batteries are leave unused for over 1 year.
 Suggest to use 14.8v lithium battery charger as the preference,and the 13.8v lead acid battery chargers is the second choice.

Special Notice:
 LiFePo4 motorcycle battery is only used for starting the motorcycles or as the power of motorcycle related applications. There may be any danger or loss if for other applications,please be cautious.